Products
The Airmux-200, 400
and 5000 wireless radios are carrier-class, high
capacity cost effective point-to-point and Point to
Multi-Point transmission system used to
connect Ethernet, E1/T1 and Fractional Serial circuits between
two distant sites over broadband wireless.
Typical applications include service extension to remote/rural
locations, cellular backhaul, emergency services and temporary
deployment, wireless backup, voice traffic extension over wireless,
and lossless hot spot backhauling.
Airmux-200 wireless
multiplexer combines legacy TDM and Ethernet services for
transmission over 5.X GHz, 4.9 GHz, 2.3 and
2.4 GHz licensed-exempt
bands. The Airmux-200 wireless multiplexer supports data rates up to
18 Mbps full duplex. Transmission is encrypted to ensure security.
-->Go to Airmux 200
Airmux-400 supports
IP data rates up to 100 Mbps full duplex and legacy TDM,
with a theoretical maximum transmission distance of up to 120
kilometers (75 miles). Services for transmission over 2.4Ghz,
2.5Ghz, 3.3-3.8Ghz and 5.X GHz licensed-exempt bands. Transmission is encrypted to ensure security.
-->Go to Airmux 400
Airmux-5000 supports
IP data rates up to 200 Mbps full duplex in a Point to Multi-Point
topology,
with a theoretical maximum transmission distance of up to 40
kilometers (25 miles). Services for transmission over 2.4Ghz,
2.5Ghz, 3.3-3.8Ghz and 4.8 to 6.0 GHz licensed-exempt bands. Transmission is encrypted to ensure security.
-->Go to Airmux
5000
Benefits of Airmux
• Combine voice and data over a single link for reduced access costs
• License exempt transmission enables fast and affordable deployment
• Installation and alignment tools enable easy deployment
• Save the costs of leased lines while extending services
• Ideal solution for cellular backhaul applications and remote
coverage areas
- Wireless multiplexer combining up to four E1/T1
(Airmux 200) or sixteen E1/T1 (Airmux 400) and
up to two Ethernet interfaces
- High data rates, up to 18 Mbps full duplex for the
Airmux-200, 100 Mbps full duplex for the Airmux 400 and
200Mbps for the Airmux-5000
- Long range up to 120 km (75 miles)
- Air interface data is encrypted using 128-bit key
|
- Multi-Point support with Airmux 500 or Airmux
200/400 with HSS option
- Hundreds of links and access devices managed
from a single SNMP fault management application
- Automatic channel selection
- Dry contact alarm relay
- Dual AC, DC or AC/DC Power
|
Further Product Information
Long distance, full duplex link
The
Airmux-200 and 400 are carrier-class, high
capacity, affordable multiplexer, connecting E1/T1 and Ethernet
networks point-to-point over a wireless link. Compliant with FCC,
CAN/CSA and ETSI regulations for license-exempt transmission, the
Airmux-200 operates over 5.7–5.85 and 5.25–5.35 (FCC, CAN/CSA) GHz,
5.4–5.7 (ETSI) GHz, 4.9 GHz (FCC), and 2.4* (ETSI and FCC) GHz bands.
Wireless transmission enables enterprises to save the cost of leased
lines while eliminating the service provider’s need for deploying
fiber, thereby enabling rapid deployment of E1/T1 and Ethernet links
at a fraction of the cost.
The
Airmux-200 and 400 consists of an indoor and an outdoor unit connected by a
Cat-5e outdoor Ethernet cable, allowing a maximum distance of 100
meters (328 feet) between the two units. The outdoor unit can be
ordered with an integrated antenna or with a connector for an
external antenna.
The Airmux 5000 is a Point to Multi-Point version of the
Airmux 4000 utilizing sector based access points with
support for up to 200 Mbps. Remote CPEs support rates up
to 20 Mbps full duplex for SLA environments. Low latency
and multi-point distances up to 40km separate this
product from all others.
Long distance, full duplex link
The
Airmux-200 integrates up to four
unframed E1 or T1 ports and up to two Ethernet ports for a total air
interface throughput of 48 Mbps. This is equivalent to a net payload
throughput of up to 18 Mbps full duplex. The maximum range of the
Airmux-200 is 80 km (50 miles). Throughput is a function of the
distance and regulation.
The
Airmux-400 integrates up to sixteen* unframed E1 or T1 ports and up
to two Ethernet ports for a total air interface throughput of 105
Mbps. This is equivalent to a net payload throughput of up to 50 Mbps full duplex. The maximum range of the
Airmux-400 is 120 km (75 miles). Throughput is a function of the
distance and regulation.
The Airmux 5000 supports a Point to Multi-Point topology
with rates up 200Mbps at the base and full duplex 20Mbps
at the remotes. (full rate available in Q3/2011)
An integrated 10/100BaseT Ethernet bridge transparently forwards
frames and learns up to 2,000 MAC addresses. The accurate E1/T1
clock recovery, low round-trip delay and high link availability
position the Airmux-200 as a carrier-class wireless transmission
system.
Advanced encryption and security features
The Airmux-200, 400 and 5000 incorporate
safeguards to secure the wireless transmission against possible
attack. The advanced encryption standard (AES) and dynamic
encryption key change are aimed to prevent unauthorized
eavesdropping. These mechanisms, together with a coded time stamp
(CCM), prevent false transmission from an intruding terminal. The
network management system and the equipment are protected by a
password and a challenge/response scheme.
An Airmux-200, 400
or 5000 link can be managed by a Windows-based application
supplied with the device. The RADview SNMP fault management
application can be ordered in cases where multiple links are to be
deployed and managed from a central platform. All parameter
configurations are link-based, simplifying maintenance and
installation.
The Airmux-200, 400 and 5000 are perfect solutions for connecting remote enterprise
locations, cellular backhaul, broadband Last Mile services and
hotspot backhauling.